Products
- High torsional stiffness
- Lifting range up to 9 m
- Very fast cycle times possible
Our dynamic modules with toothed belt drive are ideal for the highest demands on dynamics under extreme loads. Due to the special design of the extruded profile, the torsionally stiff base body is also suitable for unsupported applications. The linear axis is constructed with two parallel guides and a toothed belt running between them. The rotating components are shielded by metal sheets so that no contamination can enter the machine environment.
The modules are ready-to-install modular linear systems, which can be flexibly configured according to the respective customer requirements. This wide range of options makes it possible to ideally satisfy customer needs. Our dynamic modules can be combined with other series to form multi-axis solutions using the standardised adapter parts.
- E-mobility
- Handling axis
- Injection moulding handling
- Robot handling (7th axis)
- Gantry handling
| Type / size | DM2 | DM3 | |||||
| Profile cross-section | [mm] | 180 x 148 | 220 x 180 | ||||
| Max. travel/stroke 3) | Max. travel/stroke 3) | 6930 | 6300 | ||||
| Stroke per revolution | [mm] | 320 | 392 | ||||
| Repeat accuracy | [mm] | < 0.20 4) | < 0.20 4) | ||||
| Static load rating Cy 0 1.2 | [kN] | 162.5 | 311.6 | ||||
| Static load rating Cz 0 1 | [kN] | 162.5 | 162.5 | ||||
| Static load rating Cz 0 2 | [kN] | 162.5 | 311.6 | ||||
| Static axial load rating Fx 0 | [N] | depending on application | |||||
| Static moment Mx 0 | [Nm] | 13725 | 29565 | ||||
| Static moment My 0 | [Nm] | 15280 | 52110 | ||||
| Static moment Mz 0 | [Nm] | 15280 | 52110 | ||||
| Dynamic load rating Cy 1,2 1) | [kN] | 92.3 | 165.7 | ||||
| Dynamic load rating Cz 1,2 1) | [kN] | 92.3 | 165.7 | ||||
| Dynamic axial load rating Fx 1) | [N] | depending on application | |||||
| Dynamic moment Mx 1) | [Nm] | 7797 | 15795 | ||||
| 15795 | [Nm] | 8680 | 27675 | ||||
| Dynamic moment Mz 1) | [Nm] | 8680 | 27675 | ||||
| Max. traversing speed 2) | [m/s] | 6.0 | 6.0 | ||||
| Max. acceleration 2) | [m/s2] | 50.0 | 50.0 |
1) With regard to service life, we recommend loading the units with max. 20% of the dynamic load rating
2) Higher requirements on request
3) Larger strokes possible with composite base profiles
4) Per 1000 mm stroke
Attention: Specified values are empirically determined and vary depending on the application.
The values are maximum values.
